Introduction
Made of high-quality polymer emulsion and inorganic silicate, tile adhesive can be combined with a variety of bonding materials. After painting on the surface of the object, it improves the physical properties and surface chemistry of the surface of the material, improves the adhesion of the tile and the base layer greatly, and solves the common problems of empty drums and falling off in the ceramic tile.
Property
l Mild smell, environment friendly
l Good tenacity and low shrinkage
l Anti-aging, Impact-resistance
l Acid and alkali resistant.
Scope of Application
Suitable for transform the concrete wall indoor or outdoor into smooth surface after form work removed, Bonding of the vitrified brick, antique brick, culture stone, ceramic and tile on to wall. Also use to prevent the loose of mortar, prevent Exterior wall paint crack
or yellowing, renew and water-proof, falling off-proof of old wall.
Direction for Use
l Surface layer must be flat, tight, oil-free, sand-free, water-free, loses and cracks should be repaired in advance.
l Working space should be dry and well ventilated, humidity should less than 70%, the temperature should less than 50℃
l Use the roller or brush to brush the adhesive on the surface, leave it to dry (usual need 15-30mins).
l Apply cement or tile adhesive and stick to floor or wall.
Attention
l The temperature should be 5-35℃ during application and within 24hour since finished. Avoid watering within 24hour after application.
l Avoid dilute with water and mixing with other material. The readied tile adhesive should be used within regular time.
l If contact to eyes, go to the hospital immediately.
l Store in cool (5~40℃), dry environment, get rid of wet and rain.