Introduction

Anti-Cracking Sealant is a two-parts epoxy sealant, main component are modified epoxy resin and hardener. It is not only retaining the excellent bonding strength and adhesion of epoxy resin, but also possessing the advantage of not sagging, easy to apply, high strength and hardness.

Property:   

• Mild smell、environmental friendly

• strong adhesion, high hardness

• Not sagging, easy to apply

• Acid and alkali resistant

• anti-yellowing; wear-resistant

Scope of application

Suitable for bonding and crack repairing of Wood, calcium silicate board, gypsum board and other ceiling. Also suitable for the cracks repairing of floor ceramic, wall, drywall, concrete, stone and metal.

Method of Application:

Mix Part A and Part B well with mixing ratio of 1:1 or 2:1(refer to products introduction on package). The total mixing amounts each time no more than 500g.   

Attention

Clear the gap need to be bonded, make the gap width 4-7mm. Primer or finish should be applied at first if the surface has floating power or dust. Embed the readied mix sealant in to the gap after the primer or finish dry.